The heat pump drying unit is composed of a heat pump main engine, a cabin internal circulation system and an intelligent control system. The operation control of the whole drying system is completed on the controller, and the temperature and humidity of the drying room can be accurately controlled in multiple stages.
Product features:
- only water is released from the drying house; no energy is wasted, it is 100% energy recycle.
- Outside pollutants cannot get into the drying house. This keeps the material extremely clean.
- It is dependent of the surrounding temperature and humidity, so it can be used in any location with any climate condition.
- Drying temperature, humidity and time can be programmed by stage.
| All in one Closed Loop Dehumidification Drying Heat Pump |
| Model | TRT-15HP-DC |
| Rated heating capacity | kW | 50 |
| Rated Input Power | kW | 13 |
| E-heater | KW | 18 |
| Rated Current | A | 24.6 |
| Power Supply | V/Hz/N | 380V/50Hz/3N |
| Circulating air flow | m³/h | ≥23000 |
| Fan working power | kW | 5.5 |
| Dehumidification capacity (L/H) | L/h | 45 |
| Inside Room Temp Keeping | ℃ | 70 |
| Max Air Temp Outlet | ℃ | 80 |
| Working Enviroment | ℃ | from minus 30 to 45 |
| Refrigerant | | R134A |
| Protection Level | | IPX4 |
| Weight | Kg | 480 |
| Size | mm | 2100×1100×1980 |
